GB/T 23595.3-2009 白光LED灯用稀土黄色荧光粉试验方法 第3部分:色品坐标的测定
作者:标准资料网 时间:2024-05-17 17:20:29 浏览:9581
来源:标准资料网
基本信息
标准名称: | 白光LED灯用稀土黄色荧光粉试验方法 第3部分:色品坐标的测定 |
英文名称: | Test methods of rare earth yellow phosphor for white LED lamps - Part 3: Determination of chromaticity coordinates |
中标分类: |
冶金 >>
金属化学分析方法 >>
稀有金属及其合金分析方法 |
ICS分类: |
冶金 >>
有色金属 >>
其他有色金属及其合金
|
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2009-04-23 |
实施日期: | 2010-02-01 |
首发日期: | 2009-04-23 |
作废日期: | |
主管部门: | 国家标准化管理委员会 |
提出单位: | 全国稀土标准化技术委员会 |
归口单位: | 全国稀土标准化技术委员会 |
起草单位: | 厦门通士达新材料有限公司、杭州远方光电信息有限公司、有研稀土新材料股份有限公司等 |
起草人: | 魏岚、韩钧祥、戴茜玲 |
出版社: | 中国标准出版社 |
出版日期: | 2010-02-01 |
页数: | 5页 |
计划单号: | 20071490-T-303 |
适用范围
本部分规定了440nm~480nm 蓝光激发稀土黄色荧光粉色品坐标的测定方法。
本部分适用于440nm~480nm 蓝光激发稀土黄色荧光粉色品坐标的测定。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 冶金 金属化学分析方法 稀有金属及其合金分析方法 冶金 有色金属 其他有色金属及其合金
【英文标准名称】:Medicalelectricalequipment.Particularrequirementsforsafety.Specificationforoxygenconcentrators
【原文标准名称】:医疗电气设备.特殊安全要求.氧浓缩器规范
【标准号】:BS5724Pt.2Sec.2.23-1989
【标准状态】:作废
【国别】:英国
【发布日期】:1989-09-29
【实施或试行日期】:
【发布单位】:英国标准学会(BSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:使用说明;医院设备;温度;安全措施;吸入疗法设备;信号装置;作标记;准确度;颜色;医疗设备;医用呼吸器;气体流动;浓度(化学);医用电气设备;浓缩器;清晰度;性能试验;试验设备;防火;流量测量;电气安全;氧
【英文主题词】:
【摘要】:
【中国标准分类号】:C39
【国际标准分类号】:11_040_10
【页数】:22P;A4
【正文语种】:英语
【英文标准名称】:Measurementofquartzcrystalunitparameters-Basicmethodforthemeasurementofresonancefrequencyandresonanceresistanceofquartzcrystalunitsbyzerophasetechniqueina-network
【原文标准名称】:石英晶体单元参数的测量.第1部分:用π型网络零相位技术测量石英晶体单元谐振频率和谐振电阻的基本方法
【标准号】:BSEN60444-1-1997
【标准状态】:现行
【国别】:英国
【发布日期】:1993-09-15
【实施或试行日期】:1993-09-15
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:频率测量;补偿器(电气);介质装置;试验条件;再现性;校正;电路;相位测量(电);共振;石英;谐振器;晶体谐振器;波的性质和现象;压电器件;电阻;频率;共振频率;准确度;电波测量;电阻测量;电学测量;试验设备;电路网络
【英文主题词】:
【摘要】:Thisstandardspecifiesasimplemethodofmeasurementofresonancefrequencyandresonanceresistanceofquartzcrystalunitsanddescribesasuitablemeasuringnetwork.Themeasuringmethodandthenetworkaresuitableforuseoverthefrequencyrange1MHzto200MHzwithafractionalfrequencyaccuracyoftheorderof10withareproducibilityof10to10dependingonthetypeofcrystalunitbeingmeasured,andanaccuracyofthemeasurementofresonanceresistanceof±2%to±5%dependingontheaccuracyofthevoltagemeasurement.However,aboveapproximately100MHztheuseofthismeasuringmethodislimitedbytheeffectsoftheshuntcapacitanceC0ofthecrystalunitundertest.Toenablethemeasuringmethodtobeusedundertheseconditions,theuseofsomemethodofC0compensationisadvisable.AmethodofC0compensationwillbeissuedinIECPublication444-3asanIECreport.NOTEThemodificationstothemeasuringsystemandnetworkcontainedinthisstandardhavebeenintroducedtoensurethattheclaimscontainedwithinitareachievable.Theydonot,however,invalidatethenetworkproducedaccordingtothefirsteditionThesenetworksarestillacceptableasaninternationalstandardmethodofmeasurementofresonancefrequencyfxandresonanceresistanceRr.IfthereferenceresistorsdescribedinthestandardareslightlymodifiedtoallowinsertionintonetworksmanufacturedaccordingtothefirsteditionofPublication444thentheproblemofobtainingsatisfactoryreferenceresistorsissolved.
【中国标准分类号】:L21
【国际标准分类号】:31_140
【页数】:32P.;A4
【正文语种】:英语